Location Requirements

WARNING

Explosion Hazard

Do not store fuel tank in a garage or indoors.

Do not store grill with fuel tank in a garage or indoors.

Failure to follow these instructions can result in death, explosion, or fire.

Select a location that provides minimum exposure to wind and traffic paths. The location should be away from strong draft areas.

Do not obstruct flow of combustion and ventilation air.

Clearance to combustible construction for built-in outdoor grills:

A minimum of 24" (58 cm) must be maintained between the front of the grill hood, sides and back of the grill and any combustible construction.

A 24" (58 cm) minimum clearance must also be maintained below the cooking surface and any combustible construction.

WARNING

Fire Hazard

Do not use grill near combustible materials. Do not store combustible materials near grill. Doing so can result in death or fire.

Rotisserie

A 6" (15.2 cm) minimum clearance is needed for the rotisserie motor.

A grounded, 3-prong outdoor GFI outlet is to be located to the left of the grill. See “Electrical Requirements” section.

NOTE: The rotisserie is an accessory on some models. See the “Assistance or Service” section to order.

Product Dimensions

36¼"

(92.1 cm)

23¾"

(60.5 cm)

10⁵⁄₈"

(27.1 cm)

28½" (72.4 cm)

A

22¾"

B

(57.7 cm)

A. 27" (68.6 cm) 36" (91.4 cm) 48" (121.9 cm)

B. 27" (68.6cm) models - 31¾" (80.6 cm) 36" (91.4 cm) models - 40¾" (103.4 cm) 48" (121.9 cm) models - 52¾" (133.9 cm)

Built-in Outdoor Grill Non-Combustible Enclosure

WARNING

Fire Hazard

Do not install grill on or near combustible materials.

Doing so can result in death or fire.

The enclosure for the built-in outdoor grill is to be a minimum of 11" (28.0 cm) high x 23" (58.4 cm) deep with a width of

30" (76.0 cm) for 27" (68.6 cm) grills, 39" (99.0 cm) for

36" (91.4 cm) grills and 51" (129.5 cm) for 48" (121.9 cm) grills.

This built-in outdoor grill is only for installation in a built-in enclosure constructed only of non-combustible materials. Non- combustible materials could be brick, firewall or steel. Do not use wood or other combustible materials for built-in enclosure.

Built-in Outdoor Grill Combustible Enclosure

An insulated jacket is required if the built-in grill is to be used in a combustible enclosure application. See “Assistance or Service” section or your grill dealer to order the insulated jacket kit for your model.

6

Page 6
Image 6
KitchenAid KBNU487TSS Location Requirements, Product Dimensions, Rotisserie, Built-in Outdoor Grill Combustible Enclosure