Kodak 3.1 manual When the confirmation message appears, press OK

KODAK HERO 3.1 All-in-One Printer

4.If the name of your network is:

Listed		Not listed
Press	to select your	Make sure your wireless router is turned on and
network, then press OK.		within range. If your wireless router does not
		broadcast its SSID (network name):
		1. Press	to select Unlisted Network, then press
		OK.
		2. Use the LCD keyboard (see Using the LCD
		keyboard, page 10) to enter your network name.
		3. Select WEP or WPA/WPA2 as required for your
		network's security setup, then press OK.
		NOTE: If the name of your network is still not listed,
			or your want to change your network, press
			to select Rescan for Wireless Networks,
			then press OK.

5.If your network has security enabled, use the LCD keyboard (see Using the LCD keyboard, page 10) to enter your security string.

6.When the confirmation message appears, press OK.

When the printer is successfully connected, the Wi-Fi connectivity LED stops blinking and remains lit.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO3.1+1133).

7.If you haven’t installed the KODAK All-in-One Printer Software:

a.Go to www.kodak.com/go/aiodownloads.

b.In the results list, click the link for KODAK All-in-One Printer Software for your computer operating system.

c.Follow the on-screen instructions.

www.kodak.com/go/aiosupport 8