KODAK HERO 3.1 All-in-One Printer

Safety information

KODAK HERO 3.1 All-in-One Printers are Class 1 LED Products.

•Always follow all warnings and instructions marked on the product.

•Use only the power source indicated on the product regulatory label.

•Use only the power cord that comes with the product (or an approved power cord greater or equal to H05W-F, 3G, 0.75mm2). Using another power cord may cause fire and/or shock. Do not use the included power cord with any other equipment.

•If you do not use this product for a long period of time, unplug it from the electrical outlet.

•Always turn this product off by using the On/Off button. Wait until the On/Off button stops flashing before removing the power plug from the outlet.

•Do not allow the power cord to become damaged or frayed.

•If you need to use an extension cord with this product, make sure that the ampere rating of the product does not exceed the ampere rating of the extension cord.

•Place the product on a flat, stable surface that extends beyond the product’s base in all directions. This product will not operate properly if tilted or at an angle.

•When storing or transporting this product, do not tilt or stand it on its side. Never turn this product upside down (ink can leak out of the product).

•Avoid placing this product in an environment that is subject to rapid changes in temperature or humidity, mechanical shocks, vibration, or dust. Do not place near radiators, heating vents, or in direct sunlight.

•Leave enough room around this product for sufficient ventilation.

•Do not block this product’s covers or openings, or insert any objects through slots.

•Do not use aerosol products inside or around this product.

•Do not spill any liquid on this product.

•Do not attempt to repair or service this product.

•If the power cord or plug is damaged, if any liquid has been spilled onto the product, if the product has been dropped or the case damaged, if the product does not operate normally or exhibits a major change in performance level, unplug this product and contact Kodak at www.kodak.com/go/contact.

www.kodak.com/go/aiosupport

86

Page 90 Page 92
Page 91
Image 91
Kodak 3.1 manual Safety information
Page 90 Page 92

3.1 specifications

Kodak 3.1 is a prominent imaging technology launched by Eastman Kodak Company, known for its substantial advancements in the realm of digital photography and videography. The system features an array of improvements that enhance the overall quality and efficiency of image capture and processing.

One of the main features of Kodak 3.1 is its high-resolution imaging capabilities, allowing users to capture stunning images with remarkable detail and clarity. With resolutions exceeding the standards set by previous generations, Kodak 3.1 ensures that both professional photographers and hobbyists can produce high-quality prints and digital outputs.

The technology is built upon advanced image sensor technology, which incorporates larger pixels to collect more light, thereby improving low-light performance. This results in vivid colors and reduced noise in photographs taken in challenging lighting conditions. Additionally, Kodak 3.1 employs a sophisticated image processing algorithm that enhances dynamic range and maintains details in both highlights and shadows.

In terms of usability, Kodak 3.1 introduces a user-friendly interface, making it accessible for individuals of all skill levels. The intuitive navigation system allows users to swiftly adjust settings and access features without unnecessary complications. Furthermore, it boasts a range of automated shooting modes that adapt to various environments, ensuring optimal results regardless of the situation.

Another significant characteristic of Kodak 3.1 is its seamless integration with cloud storage solutions. Users can effortlessly upload images to the cloud, facilitating easy access and sharing across different platforms. This feature aligns with contemporary trends where photographers value connectivity and the ability to showcase their work online.

Kodak 3.1 also emphasizes sustainability, utilizing energy-efficient components and materials. This commitment to eco-friendliness sets it apart in a market increasingly focused on reducing environmental impact.

In summary, Kodak 3.1 represents a remarkable evolution in imaging technology, combining high-resolution capabilities, advanced image processing, user-friendly interfaces, and connectivity features. Its characteristics make it a versatile choice for those seeking to elevate their photography skills and produce professional-quality images. As Kodak continues to innovate, 3.1 stands as a testament to its legacy in the imaging industry.
Top Page Image Contents