Kodak 3.1 manual Connecting to a WPS wireless router, Pressing a button, Entering a PIN

Networking Your Printer

Connecting to a WPS wireless router

If your router supports Wi-Fi Protected Setup (WPS), you can use WPS Connect. WPS lets you configure your printer for a wireless network by pressing buttons or entering a PIN.

To connect to a network using WPS:

1.Press Home.

2.Press to select Network Settings, then press OK.

3.With Wi-Fi Setup Wizard selected, press OK.

NOTE: The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard.

4.With WPS Connect selected, press OK.

5.Select one of two methods of connecting:

IMPORTANT: Before you press OK on the printer, make sure you know where the router's push button is, or where to enter the generated PIN. If necessary, consult your Internet service provider or router device manufacturer’s documentation for more information.

Pressing a button	Entering a PIN
NOTE: You will have two minutes to	a. Press	to select Generate
press or select the WPS button.	WPS PIN, then press OK.
It may be a button on the device	b. In your wireless router’s software,
or a virtual button in the device’s	locate the PIN screen.
software.	c. Enter the PIN you received on the
a. With Push Button Configuration	LCD into the PIN screen.
selected, press OK.
b. Press or select the WPS button for
your wireless router.

6.When the confirmation message appears, press OK.

When the printer is successfully connected, the Wi-Fi LED will stop blinking and remain lit.

7.If you haven’t yet installed the KODAK All-in-One Printer Software:

a.Go to www.kodak.com/go/aiodownloads.

b.In the results list, click the link for KODAK All-in-One Printer Software for either WINDOWS or MACINTOSH Operating System, depending on your computer’s operating system.

c.Follow the on-screen instructions to install the software.

9 www.kodak.com/go/aiosupport