About Printer Initialization

When you turn the 8500 printer on, it initializes (starts up and performs a self-check) in a few seconds. During this time, the POWER, MEDIA, and PARALLEL and USB lights blink.

If the 8500 Printer Does Not Initialize

If the 8500 printer fails to initialize, no light illuminates on the display panel. Turn the 8500 printer off and then back on.

If a light still does not illuminate, turn off both the 8500 printer and the computer. Disconnect all cables from the 8500 printer except the power cable. Turn on the 8500 printer. If no light illuminates, call for service.

Introduction

Setting up the 8500 Printer

Operating the 8500 Printer

Troubleshooting

Site Specifications

Accessories and Supplies

CONTENTS

PRINTER DRIVER GUIDE

SEARCH

HELP

Page 36
Image 36
Kodak manual About Printer Initialization, If the 8500 Printer Does Not Initialize