Connecting a Parallel Cable

To connect a parallel (Centronics) cable:

1.Make sure that your computer is turned off.

2.Connect the female end (no pins) of the cable to the 8500 printer parallel port.

Parallel port

Power cord

inlet

 

3.Connect the 25-pin end of the cable to the computer’s parallel port.

4.Connect the power cord.

5.Press the POWER button to turn on the 8500 printer.

6.Press the ONLINE button to set the 8500 printer to offline mode.

7.Press the INTERFACE button so that the PARALLEL light blinks.

8.Press the ONLINE button to set the 8500 printer to online mode. The PARALLEL light becomes steady.

Introduction

Setting up the 8500 Printer

Operating the 8500 Printer

Troubleshooting

Site Specifications

Accessories and Supplies

CONTENTS

PRINTER DRIVER GUIDE

SEARCH

HELP

Page 28
Image 28
Kodak 8500 manual Connecting a Parallel Cable