Repairing a Torn Ribbon
1.Position the ribbon cartridge with the torn ribbon on a clean place as shown below.
Office tape
Supply spool
Takeup spool
2.Place a piece of office tape on the center of the ribbon.
3.Wind the takeup spool counterclockwise so that the office tape is not seen and the ribbon is straight.
4.Install the repaired ribbon cartridge in the 8500 printer.
Introduction
Setting up the 8500 Printer
Operating the 8500 Printer
Troubleshooting
Site Specifications
Accessories and Supplies
CONTENTS | PRINTER DRIVER GUIDE | SEARCH | HELP |
