Turning the scanner off
Starting and stopping scanning
Document preparation
•Press the power switch on the
NOTES:
•You do not need to turn the main breaker switch off unless you are going to move the scanner.
•There are four leveling feet on the bottom of the scanner. If you need to move the scanner, these leveling feet must be raised. Contact your Kodak Service Representative before attempting to relocate the scanner.
The scanner is controlled by a capture software application. To start and stop scanning, refer to the documentation provided with your application software.
Kodak Scanners have been tested with a range of documents that represent the broad spectrum of document types found in the most common business applications. Optimal scanner performance is achieved when scanning documents within the recommended document specifications listed below. Scanning documents outside of these specifications may lead to undesirable results in terms of scanner reliability, image quality, and/or consumable life.
Materials:
•Virgin, recycled and photographic papers
•Clear protective sleeves meeting the size and thickness requirements in this section
Paper Types: Bond, Laser, Inkjet, Offset
Paper Weights: The input elevator handles a broad range of paper weights from 45 to 200 g/m2 (12 to 110 lb.). The Kodak Feeder Kit for
Ultralightweight Paper can handle paper weights from 25 to 75 g/m2 (7 to 20 lbs).
Minimum Document Size: 6.4 x 6.4 cm (2.5 x 2.5 in.).
Maximum Document Size: 30.5 x 86 cm (12 x 34 in.). Documents larger than 43 cm (17 in.) may require operator assistance and installation of optional document extenders.
Paper inks: All inks on the paper must be dry before scanning is
started. This includes: Standard offset printing, Inkjet printer, Thermal transfer, Handwriting inks.
Correction Fluids: Liquid Paper®,
