Kodak i1800 Series manual Changing the rear, horizontal print position

3.The printer carrier slides easily along the rail. There is a small arrow on the green printer carrier. Slide the printer carrier to the desired position aligning the arrow with the detent position on the rail.

4.Close the printer access cover.

5.Reinstall the output tray.

NOTE: Printing automatically stops approximately ½-inch (1.27 cm) from the trailing edge of the document, even if the information has not been completely printed.

Changing the rear	There are 8 horizontal print positions. These positions are visible by a
horizontal print position	small detent on the printer rail.
	1.	Lift the top access cover.
	2.	The printer carrier slides easily along the rail. There is a small arrow
		on the green printer carrier. Slide the printer carrier to the desired
		position aligning the arrow with the detent position on the rail.

3. Close the top access cover.

4-4 A-61555 March 2007