SERVICE MANUAL
Replacing the LAMP SOCKET TERMINAL ASSEMBLY, N.P.
SCREW
Warning
TAB (2)
LAMP DOOR
PLATE ASSEMBLY
PROJECTOR
LAMP
LAMP
EJECTOR
LAMP SOCKET
TERMINAL
ASSEMBLY
CONDENSER
LENS
HEAT ABSORBING
GLASS A091_0018CCA
A091_0018CA
Dangerous Voltage
[1]Disconnect the main power.
[2]Remove the LAMP MODULE.
[3]Remove the PROJECTION LAMP from the LAMP MODULE.
[4]Remove the SCREW from the LAMP DOOR PLATE ASSEMBLY.
[5]Release the 2 TABS on the bottom side of the LAMP MODULE next to the LAMP MODULE DOOR.
[6]Remove the LAMP DOOR PLATE ASSEMBLY.
Caution
Remove the CONDENSER LENS and HEAT ABSORBING GLASS and set the parts on a clean cloth. Do not set on a cold surface; this will cause damage to the parts.
[7]Remove the LAMP EJECTOR.
[8]Remove the LAMP SOCKET TERMINAL ASSEMBLY.
Installing the LAMP SOCKET TERMINAL ASSEMBLY
[1]Do the replacement procedure for the LAMP SOCKET TERMINAL ASSEMBLY in reverse order.
18 | 30APR96 – |
