Kodak KKE PLUS, J-E PLUS, E-PLUS SLIDE service manual Painted Projector

SERVICE MANUAL

MOTOR SCREW FAN

RETAINER

CLIP

FAN PLATE

ASSEMBLY

FAN	SCREW (3)
BELT

BLOWER

MECHANISMASSEMBLY BELT

FAN CAP

E-RING

SPRING

WASHER

FAN

SCREW	WASHER
	CORK
	WASHER

FAN PLATE

Painted PROJECTOR

A008_0172HCA

A008_0172HA

[11]Lift the BLOWER COVER ASSEMBLY up.

[12]Remove the 3 Hex 1/4 in. SCREWS from the MOTOR.

[13]Lift the MOTOR until you observe the FAN BELT and MECHANISM BELT.

[14]Remove the FAN BELT and MECHANISM BELT off the MOTOR PULLEY. Use SPRING HOOK TL-1165.

Caution

Move the MOTOR to allow access to the parts; wires are still connected to the MOTOR. Do not cause damage to the MOTOR wires.

[15]N.P. only: Remove the RETAINER CLIP from the FAN SHAFT.

[16]Painted Models only: Remove the FAN CAP, E-RING, SPRING, and WASHER.

[17]Pull the FAN up and off the FAN SHAFT to allow access to the FAN BELT.

[18]Remove the FAN BELT.

[19]N.P. only: Remove the 3 Torx SCREWS from the FAN SHAFT ASSEMBLY.

[20]Lift and remove the FAN SHAFT ASSEMBLY.

6 30APR96 – SM4530-1