Kodak KKE PLUS, J-E PLUS, E-PLUS SLIDE service manual Installing the Focus Shaft Assembly

SERVICE MANUAL

[17]Remove the FOCUS MOTOR BRACKET ASSEMBLY.

[18]Push the RACK LEVER away from the FOCUS SHAFT ASSEMBLY.

[19]Remove the FOCUS SHAFT ASSEMBLY.

Installing the FOCUS SHAFT ASSEMBLY

Important

Do the adjustments for the PHOTOCELL NULL and AUTO-FOCUS CLAMP after installation. See the Adjustments section.

Replacing the FOCUS SHAFT ASSEMBLY - Non Auto-Focus Models

SCREW	FOCUS SHAFT
FOCUS SHAFT	SPRING
ASSEMBLY

FOCUS MOTOR

BRACKET

SPACER	LENS SUPPORT
	BRACKET

E-RING SCREW

A091_0020HCA

A091_0020HA

Warning

Dangerous Voltage

[1]Disconnect the main power.

[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3]Remove the FOCUS KNOB.

[4]Remove the 3 SCREWS from the LENS MOUNT ASSEMBLY.

[5]Lift and remove the LENS MOUNT ASSEMBLY.

[6]Remove the FOCUS SHAFT SPRING from the LENS MOUNT BRACKET.

[7]Remove the E-RING and SPACER from the FOCUS SHAFT ASSEMBLY.

[8]Remove the SCREW from the LENS SUPPORT BRACKET.

[9]Lift and remove the LENS SUPPORT BRACKET.

[10]Remove the E-RING and SPACER from the FOCUS SHAFT ASSEMBLY.

[11]Remove the SCREW from the FOCUS MOTOR BRACKET ASSEMBLY.

24 30APR96 – SM4530-1