SERVICE MANUAL
Installing the MOTOR
FAN BELT | MECHANISM BELT |
|
A091_4015BCA
A091_4015BA
Important
When installing the FAN and MECHANISM BELTS, install the MECHANISM BELT on the small MOTOR PULLEY, and the FAN BELT on the large MOTOR PULLEY.
[1]Do the replacement procedure for the MOTOR in reverse order.
Replacing the WORM PULLEY and MECHANISM BELT
WORM PULLEY
SCREW
MECHANISM
BELT
Warning
Dangerous Voltage
[1]Disconnect the main power.
[2]Do the replacement procedure for the LOWER HOUSING ASSEMBLY.
[3]Do the replacement procedure for the MOTOR except do not disconnect the wires from the
MOTOR.
[4]Remove the Torx SCREW (on N.P. models) (or Hex SCREW on Painted Models) from the WORM PULLEY ASSEMBLY.
[5]Move the TAB on the WORM PULLEY ASSEMBLY out.
[6]Remove the WORM PULLEY ASSEMBLY and
MECHANISM BELT.
A091_4017GCA
A091_4017GA
8 | 30APR96 – |
