![](/images/new-backgrounds/1317888/317888163x1.webp)
Chapter 9
Installing the Custom Camera Insert
A universal insert is
A custom insert is included with your camera. It provides a perfect fit and more stability for the Kodak EasyShare LS633 zoom digital camera.
Remove the Universal Insert
1Place your thumbs against the front of the universal insert. Press in and lift.
2Lift the side edge of the insert, then remove the insert from the dock.
3 Save the universal insert as a spare.
Install the Custom Insert
Cutout
Connector
1Position the custom insert so that the cutout lines up with the camera dock connector.
2Fit the insert into the groove in the dock. Snap it into place.
NOTE: To order a custom insert for your camera, visit
www.kodak.com/go/ls633accessories.
70