
Chapter 6
Changing the Default Print Quantity
The Default Print Quantity setting determines the value that is displayed on the Share Print screen (page 52). The default value is 1.
1Press the Menu button.
2Press to highlight Setup
, then press the OK button.
3 Press | to highlight Default Print |
Quantity | , then press the OK button. |
4 Press | to select the new default |
quantity, then press the OK button.
5Press the Menu button to exit the menu. This setting remains until you change it.
Turning Off Quickview
After you take a picture or video, Quickview displays it on the camera screen for approximately 5 seconds (see page 19 and page 38). To save battery power, turn off Quickview.
1Press the Menu button.
2Press to highlight Setup
, then press the OK button.
3Press to highlight Quickview
, then press the OK button.
4Press to highlight Off, then press the OK button.
5Press the Menu button to exit the menu.
The picture is not displayed on the camera screen after you take it. To see the picture or video, press the Review button. This setting remains until you change it.
56