Chapter 10

Problem

Cause

Solution

 

 

 

Picture is not

The lens is dirty.

Clean the lens (page 96).

clear.

 

 

Subject too close when

Move so there is at least 23.6 in.

 

 

taking picture.

(60 cm) between camera and

 

 

subject, or at least 5.1 in. (13

 

 

cm) in Close-up mode (Wide).

 

 

 

 

Subject or the camera

Place the camera on a flat,

 

moved while the

steady surface or use a tripod

 

picture was taken.

 

 

 

 

 

The subject is too far

Move so there is no more than

 

away for the flash to be

11.2 ft (3.4 m) between the

 

effective.

camera and the subject; 6.5 ft

 

 

(2 m) in Telephoto.

 

 

 

 

Auto focus was not

To take the best possible

 

achieved.

pictures, press the Shutter

 

 

button half-way and hold.

 

 

When the Ready light glows

 

 

green, press the Shutter button

 

 

the rest of the way down to

 

 

take the picture. (If the amber

 

 

light blinks, release the Shutter

 

 

button and recompose picture.)

 

 

 

Slide show does

Video Out setting is

Adjust the camera Video Out

not run on

incorrect.

setting (NTSC or PAL,

external video

 

page 59).

device.

 

 

External device is set

See the external device’s user’s

 

 

incorrectly.

guide.

 

 

 

Camera freezes

Camera detected an

Turn the camera off, then back

up when a card is

error when the card

on. Make sure the camera is

inserted or

was inserted or

turned off before inserting or

removed.

removed.

removing a card.

 

 

 

81

Page 93
Image 93
Kodak LS633 manual Picture is not Lens is dirty Clean the lens Clear