Dell NX200 owner manual Faulty hard drive, USB Replace the USB medium

Table 1-2. System Messages (continued)

Message	Causes	Corrective Actions
Sector not found	Faulty hard drive, USB	Replace the USB medium
Seek error	device, or USB medium.	or device. Ensure that the
		USB or SATA backplane
Seek operation
		cables are properly
failed		connected.
		See "Troubleshooting a USB
		Device" on page 130 or
		"Troubleshooting a Hard
		Drive" on page 141 for the
		appropriate drive(s) installed
		in your system.
Shutdown failure	General system error.	See "Getting Help" on
		page 157.
The amount of	Memory has been added or	If memory has been added or
system memory	removed or a memory	removed, this message is
has changed	module may be faulty.	informative and can be
		ignored. If memory has not
		been added or removed,
		check the SEL to determine
		if single-bit or multi-bit
		errors were detected
		and replace the faulty
		memory module.
		See "Troubleshooting System
		Memory" on page 137.

About Your System

45