![](/images/new-backgrounds/1266455/26645591x1.webp)
Table 1-2. System Messages (continued)
Message | Causes | Corrective Actions |
The following | Invalid memory |
DIMMs should | configuration. The specified |
match in | memory modules do not |
geometry: | match in size, number |
x,x,... | of ranks, or number of |
The following | data lanes. |
| |
DIMMs should |
|
match in rank |
|
count: x,x,... |
|
Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 98.
The following DIMMs should match in size: x,x,...
The following DIMMs should match in size
and geometry:
x,x,...
The following DIMMs should match in size and rank count:
x,x,...
Thermal sensor | A memory module without a | Replace the memory module. |
not detected on x thermal sensor is installed in | See "Expansion Cards" on | |
| the specified memory slot | page 103. |
|
|
|
Faulty battery or faulty chip. | See "Troubleshooting the | |
clock stopped |
| System Battery" on page 134. |
46
About Your System