7Place the system upright on a flat surface.
8Reattach any peripherals and connect the system to an electrical outlet.
9Turn on the system and attached peripherals.
Expansion Card Stabilizer
Removing the Expansion Card Stabilizer
1Turn off the system and attached peripherals. Disconnect the system from the electrical outlet and peripherals.
2Open the system. See "Opening the System" on page 79.
3While pressing inwards on the touch points of the expansion card stabilizer, lift it away from the system. See Figure
Installing the Expansion Card Stabilizer
1Align the expansion card stabilizer with the slots on the chassis and the cooling shroud.
2Hold the touch points and lower the expansion card stabilizer. See Figure
3Close the system. See "Closing the System" on page 80.
4Place the system upright on a flat surface.
5Reattach any peripherals and connect the system to an electrical outlet.
6Turn on the system and attached peripherals.
Installing System Components
81