NOTE: The following LCD status messages are displayed in the Simple format.
Table 1-1. LCD Status Messages
Code | Text | Causes | Corrective Actions |
E1000 Failsafe voltage error. Contact support.
Check the system event log for critical failure events.
Remove AC power to the system for 10 seconds and restart the system.
If the problem persists, see "Getting Help" on page 157.
E1114 Ambient Temp | Ambient temperature has | See "Troubleshooting |
exceeds | reached a point outside of | System Cooling Problems" |
allowed | the allowed range. | on page 136. |
range. |
|
|
E1116 Memory | Memory has exceeded |
disabled, | allowable temperature |
temp above | and has been disabled |
range. Power | to prevent damage to |
cycle AC. | the components. |
Remove AC power to the system for 10 seconds and restart the system.
See "Troubleshooting System Cooling Problems" on page 136. If the problem persists, see "Getting Help" on page 157.
E1210 | Motherboard | CMOS battery is missing | See "Troubleshooting the |
| battery | or the voltage is outside | System Battery" on |
| failure. | of the allowable range. | page 134. |
| Check |
|
|
| battery. |
|
|
E1216 | 3.3V | 3.3V voltage regulator | Remove and reseat the |
| Regulator | has failed. | PCIe expansion cards. |
| failure. |
| If the problem persists, |
| Reseat PCIe |
| see "Troubleshooting |
| cards. |
| Expansion Cards" on |
|
|
| page 143. |
24
About Your System
