Table 1-1. LCD Status Messages (continued)
Code | Text | Causes | Corrective Actions |
|
|
|
|
E1717 | CPU # | The system BIOS has | Check the SEL for |
| internal | determined that the | more information, and |
| error. Review | processor has had an | then clear the SEL. |
| & clear SEL. | internal error. | Remove AC power to the |
|
|
| system for 10 seconds, |
|
|
| and restart the system. |
|
|
| If the problem persists, |
|
|
| see "Getting Help" on |
|
|
| page 157. |
|
|
|
|
E171F | PCIe fatal | The system BIOS has | Remove and reseat the |
| error on Bus | reported a PCIe fatal error | PCIe expansion cards. |
| ## Device ## | on a component that | If the problem persists, |
| Function ## | resides in PCI | see "Troubleshooting |
|
| configuration space at | Expansion Cards" on |
|
| bus ##, device ##, | page 143. |
|
| function ##. |
|
|
|
|
|
E1810 | Hard drive ## | The specified hard drive | See "Troubleshooting a |
| fault. Review | has experienced a fault. | Hard Drive" on page 141. |
| & clear SEL. |
|
|
E1812 | Hard drive ## | The specified hard drive | Information only. |
| removed. | has been removed from |
|
| Check drive. | the system. |
|
E1A1D Control panel | USB cable to the |
USB cable not | control panel is |
detected. | missing or bad. |
Check cable. |
|
Reseat the cable. If the problem persists, replace cable.
If the problem persists, see "Getting Help" on page 157.
E2010 Memory not | No memory was | Install memory or reseat |
detected. | detected in the system. | the memory modules. |
Inspect |
| See "Installing Memory |
DIMMs. |
| Modules" on page 100 or |
|
| "Troubleshooting System |
|
| Memory" on page 137. |
30
About Your System