Table 1-1. LCD Status Messages (continued)
Code | Text | Causes | Corrective Actions |
|
|
|
|
E2011 | Memory | Memory detected, but is | See "Troubleshooting |
| configuratio | not configurable. | System Memory" on |
| n failure. | Error detected during | page 137. |
| Check DIMMs. | memory configuration. |
|
E2012 | Memory | Memory configured, | See "Troubleshooting |
| configured | but is unusable. | System Memory" on |
| but unusable. |
| page 137. |
| Check DIMMs. |
|
|
E2013 | BIOS unable | The system BIOS failed | See "Troubleshooting |
| to shadow | to copy its flash image | System Memory" on |
| memory. Check | into memory. | page 137. |
| DIMMs. |
|
|
E2014 | CMOS RAM | CMOS failure. | Remove AC power to the |
| failure. | CMOS RAM not | system for 10 seconds and |
| Power cycle | functioning properly. | restart the system. |
| AC. |
| If the problem persists, |
|
|
| see "Getting Help" on |
|
|
| page 157. |
|
|
|
|
E2015 | DMA | DMA controller failure. | Remove AC power to the |
| Controller |
| system for 10 seconds and |
| failure. |
| restart the system. |
| Power cycle |
| If the problem persists, |
| AC. |
| see "Getting Help" on |
page 157.
E2016 Interrupt Controller failure.
Power cycle AC.
Interrupt controller failure. Remove AC power to the system for 10 seconds and restart the system.
If the problem persists, see "Getting Help" on
page 157.
About Your System
31
