•Show Ending Timestamp — Time stamps the test log.
•Test Iterations — Selects the number of times the test is run.
•Log output file pathname — Enables you to specify the diskette drive or USB memory key where the test log file is saved. You cannot save the file to a hard drive.
Viewing Information and Results
The following tabs in the Customize window provide information about the test and the test results.
•Results — Displays the test that ran and the result.
•Errors — Displays any errors that occurred during the test.
•Help — Displays information about the currently selected device, component, or test.
•Configuration — Displays basic configuration information about the currently selected device.
•Parameters — Displays parameters that you can set for the test.
150
Running the System Diagnostics
