3Disassemble components from the system. See "Installing System Components" on page 73.
•Hard drives
•SD cards
•USB memory key
•Expansion cards
•iDRAC6 Express card
•Expansion cards
•Power supply
•System fan
•Processor and heat sink
•Memory modules
4Let the system dry thoroughly for at least 24 hours.
5Reinstall the components you removed in step 3.
6Close the system. See "Closing the System" on page 80.
7Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
If the system does not start properly, see "Getting Help" on page 157.
8If the system starts properly, shut down the system and reinstall all of the expansion cards that you removed. See "Installing an Expansion Card" on page 104.
9Run the appropriate online diagnostic test. See "Using Online Diagnostics" on page 147.
If the tests fail, see "Getting Help" on page 157.
Troubleshooting Your System
