Dell NX200 owner manual

Front Bezel

NOTE: If you are removing or installing a hot-swappable hard drive, the system may remain turned on and in the upright position during removal of the front bezel. If you are removing or installing any other system component(s), the system should be turned off and placed in the orientation shown in Figure 3-1.

Removing the Front Bezel

1Using the system key, unlock the front bezel (if locked).

2Slide the release latch in the direction of the arrow and rotate the top end of the bezel away from the chassis. See Figure 3-2.

3Lift the bezel away from the chassis.

Figure 3-2. Removing or Replacing the Front Bezel

1

2

	3
			5
		4
1	release latch	2	bezel
3	bezel key lock	4	bezel tabs (2)
5	tab slots (2)

Installing System Components

75