Dell NX200 owner manual

Item	Buttons	Description
1	Left	Moves the cursor back in one-step increments.
2	Select	Selects the menu item highlighted by the cursor.
3	System identification	Turns the system ID mode on (LCD panel
		flashes blue) and off.
		Press quickly to toggle the system ID on and off.
		If the system hangs during POST, press and hold
		the system ID button for more than five seconds
		to enter BIOS Progress mode.
4	Right	Moves the cursor forward in one-step increments.
		During message scrolling:
		• Press once to increase scrolling speed.

• Press again to stop.

• Press again to return to default scrolling speed.

• Press again to repeat the cycle.

Home Screen

The Home screen displays user-configurable information about the system. This screen is displayed during normal system operation when there are no status messages or errors present. When the system is in standby mode, the LCD backlight will turn off after five minutes of inactivity if there are no error messages. Press one of the three navigation buttons (Select, Left, or Right) to view the Home screen.

To navigate to the Home screen from another menu, continue to select

the up arrow until the Home icon is displayed, and then select the Home icon.

From the Home screen, press the Select button to enter the main menu. See the following tables for information on the Setup and View submenus.

About Your System

15