Dell NX200 owner manual Installing the Chassis Intrusion Switch, 119

Figure 3-21. Removing and Installing the Chassis Intrusion Switch

1

2

3

1 chassis intrusion switch 2 chassis intrusion switch cable

3intrusion connector on the system board

Installing the Chassis Intrusion Switch

1Align the chassis intrusion switch with the securing bracket notch. See Figure 3-21.

2Slide the switch into the securing bracket notch. See Figure 3-21.

3Connect the chassis intrusion switch cable to the connector on the system board.

4Close the system. See "Closing the System" on page 80.

5Place the system upright on a flat surface.

6Reattach any peripherals and connect the system to an electrical outlet.

7Turn on the system and attached peripherals.

Installing System Components

119