Dell NX200 Front Bezel Inserts, Installing the Front Bezel, Removing the Front Bezel Insert

Installing the Front Bezel

1Insert the bezel tabs into the bezel tab slots in the chassis. See Figure 3-2.

2Press the top end of the bezel into the chassis until the lever locks into place.

3Using the system key, lock the bezel.

Front Bezel Inserts

Removing the Front Bezel Insert

NOTE: Before installing a drive in one or more of the front drive bays, remove the corresponding insert(s) on the front bezel.

NOTE: Bezel inserts may contain screws on the inside. You can attach the screws to new drives, as needed.

1Remove the front bezel. See "Removing the Front Bezel" on page 75.

2Press the insert tab and pull the insert away from the bezel. See Figure 3-3.

Figure 3-3. Removing and Installing the Front Bezel Insert

1

3

		2
1	front bezel	2	front bezel insert
3	insert tab

76

Installing System Components