PCI IRQ Assignment Screen
Option | Description |
|
|
<PCIe device> | Use the <+> and |
| for a given device, or select Default to allow the BIOS to |
| select an IRQ value at system startup. |
| |
Serial Communication Screen | |
|
|
Option | Description |
|
|
Serial Communication | Options are On without Console Redirection, On with |
(On without Console | Console Redirection via COM1, and Off. |
Redirection default) |
|
|
|
Serial Port Address | Specifies the address of the serial ports. |
|
|
External Serial Connector | Specifies whether Serial Device1, Serial Device2, |
(Serial Device1 default) | or Remote Access Device has access to the external |
| serial connector. |
|
|
Failsafe Baud Rate | Displays the failsafe baud rate used for console |
(115200 default) | redirection. This rate should not be adjusted. |
|
|
Remote Terminal Type | Options are VT100/VT220 or ANSI. |
(VT100/VT220 default) |
|
|
|
Redirection After Boot | Enables or disables BIOS console redirection after the |
(Enabled default) | operating system boots. |
|
|
Using the System Setup Program and UEFI Boot Manager
59
