Installing Memory Modules
WARNING: The memory modules are hot to touch for some time after the system has been powered down. Allow time for the memory modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components on the memory module.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
CAUTION: To ensure proper system cooling,
1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2Open the system. See "Opening the System" on page 79.
3Remove the expansion card stabilizer. See "Removing the Expansion Card Stabilizer" on page 81.
4Remove the cooling shroud. See "Removing the Cooling Shroud" on page 82.
5Locate the memory module sockets. See Figure
6Remove the
7Press out the ejectors on each end of the socket until the
NOTE: Make sure to retain any removed
8Press the ejectors on the memory module socket down and out, as shown in Figure
9Handle each memory module only on either card edge, making sure not to touch the middle of the memory module.