Table 1-2. System Messages (continued)
Message | Causes | Corrective Actions |
Memory set to | The memory frequency |
minimum | may be intentionally set |
frequency. | lower for power conservation. |
| The current memory |
| configuration may |
| support only the |
| minimum frequency. |
If not an intentional setting, check any other system messages for possible causes.
Ensure that your memory configuration supports the higher frequency.
See "General Memory
Module Installation Guidelines" on page 98.
Memory tests |
| POST memory test was | Information only. |
terminated by |
| terminated by pressing the |
|
keystroke. |
| spacebar. |
|
MEMTEST lane |
| Invalid memory | Ensure that the memory |
failure |
| configuration. A mismatched | modules are installed in |
detected on | x | memory module is installed. | a valid configuration. |
| See "General Memory | ||
|
|
| |
|
|
| Module Installation |
|
|
| Guidelines" on page 98. |
No boot device | Faulty or missing optical |
available | drive subsystem, hard drive, |
| or |
| no bootable USB key |
| installed. |
Use a bootable USB key, CD, or hard drive. If the problem persists,
see "Troubleshooting an Internal USB Key" on page 139, "Troubleshooting a USB Device" on page 130, "Troubleshooting an Optical Drive" on page 140, and "Troubleshooting a Hard Drive" on page 141.
See "Using the System Setup Program and UEFI Boot Manager" on page 51 for information on setting the order of boot devices.
42
About Your System
