Table 1-1. LCD Status Messages (continued)
Code | Text | Causes | Corrective Actions |
|
|
|
|
E1410 | System Fatal | A fatal system error has | Check LCD for additional |
| Error | been detected. | scrolling messages. Remove |
| detected. |
| AC power to the system for |
|
|
| 10 seconds and restart the |
|
|
| system. |
|
|
| If the problem persists, |
|
|
| see "Getting Help" on |
|
|
| page 157. |
|
|
|
|
E1414 | CPU # temp | Processor is out | Ensure that the processor |
| exceeding | of acceptable | heat sink is properly |
| range. Check | temperature range. | installed. See |
| CPU heatsink. |
| "Troubleshooting the |
|
|
| Processor" on page 144 and |
|
|
| "Troubleshooting System |
|
|
| Cooling Problems" on |
|
|
| page 136. |
|
|
|
|
E1418 | CPU # not | Processor is missing or bad, | Ensure that the processor is |
| detected. | and the system is in | properly installed. |
| Check CPU is | an unsupported | See "Troubleshooting the |
| seated | configuration. | Processor" on page 144. |
| properly. |
|
|
E141C | Unsupported | Processor is in an | Ensure that your processor |
| CPU configur- unsupported | matches and conforms to | |
| ation. Check | configuration. | the type described in the |
| CPU or BIOS |
| processor technical |
| revision. |
| specifications outlined in |
|
|
| your system’s Getting |
|
|
| Started Guide. |
E141F CPU # | The system BIOS has |
protocol | reported a processor |
error. Power | protocol error. |
cycle AC. |
|
Remove AC power to the system for 10 seconds and restart the system.
If the problem persists, see "Getting Help" on page 157.
26
About Your System
