Dell NX200 owner manual Specified power supplys Check the AC power

Table 1-1. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E1620	Power Supply	Specified power supply's	Check the AC power
	# (### W) AC	AC input is outside of	source for the specified
	power error.	the allowable range.	power supply. If the
	Check PSU		problem persists,
	cables.		see "Troubleshooting the
			Power Supply" on page 135.
E1629	Power	The system configuration	Turn off power to the
	required >	requires more power	system, reduce the
	PSU wattage.	than the power supply can	hardware configuration or
	Check PSU and	provide, even with	install higher-wattage
	config.	throttling.	power supply, and then
			restart the system.
E1710	I/O channel	The system BIOS has	Check the SEL for more
	check error.	reported an I/O channel	information and then
	Review &	check.	clear the SEL.
	clear SEL.		Remove AC power to
			the system for 10 seconds
			and restart the system.
			If the problem persists,
			see "Getting Help" on
			page 157.
E1711	PCI parity	The system BIOS has	Remove and reseat the
	error on Bus	reported a PCI parity error	PCIe expansion cards.
	## Device ##	on a component that	If the problem persists,
	Function ##	resides in PCI	see "Troubleshooting
		configuration space at	Expansion Cards" on
		bus ##, device ##,	page 143.
		function ##.

PCI parity The system BIOS has error on Slot reported a PCI parity error

#.Review & on a component that clear SEL. resides in the specified slot.

Remove and reseat the PCIe expansion cards. If the problem persists, see "Troubleshooting Expansion Cards" on page 143.

28

About Your System