Taking pictures and videos
www.kodak.com/go/support 10
Using optical zoom
Use optical zoom to get up to 12X closer to you r subject. You can change optical
zoom before or during video recording.
1Use the EVF or LCD screen to frame your subject.
2Press Telephoto (T) to zoom in. Press Wide
Angle (W) to zoom out.
The Zoom indicator shows zoom status.
NOTE: Digital zoom is disabled when you select None in Advanced
Digital zoom (see page 46).
3Press the Shutter button halfway to set the
exposure and focus, then completely down to
take the picture. (When taking videos, press and
release the Shutter button.)

Using digital zoom

Use digital zoom in any Still mode to get an add itional 5X magnification beyond
optical zoom. Combined zoom settings are from 12X to 60X.
NOTE: To enable Advanced digital zoom, select this option in the Setup menu (page 46).
1Press Telephoto (T) to the optical zoom limit (12X). Release the button, then press
it again.
The Zoom indicator shows zoom status.
2Take the picture.
NOTE: You cannot use digital zoom for video r ecording. You may notice decreased image quality when
using digital zoom. The blue sl ider on the zoom indicator pa uses and turns red when the pic ture
quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm) print.
Digital range
Optical range
Current zoom position