Doing more with your camera

www.kodak.com/go/support 36

Changing the flash settings

NOTE: Flash settings are preset for each picture-taking mode. Some of the flash settings may not be

available in all Capture or SCN modes. When you change to Auto or Red-eye in some of these

modes, it becomes the default u ntil you change it.

NOTE: For rapid setting changes, see page 40.
Flash mode Flash fires
Auto When the lighting condition s require it.
Fill Every time you take a picture, regardless of the lighting conditions. Use
when t he sub ject is in shado w or i s "ba cklit " (wh en th e ligh t is b ehin d
the subject). In low light, hold the ca mera steady or use a tripod.
Redeye Once, so the subject’s eyes become accustomed to the flash, then fires
again when the picture is taken. (If the lighting conditions require flash
but do not require Red-eye reduction, the flash may fire only once.)
Slow
front
sync
Regardless of the shutter speed and right after the shutter fully opens.
Only useful when slower shutter speeds are used. For other slow-flash
settings, see page 52.
Off Never.
1
(Press again to exit.)
Press .
Press OK or Set.
2to highlight an option.
3
Blinking indicates the flash
is charging. Take the picture
when the blinking stops.
The active icon is displayed
in the EVF/LCD screen.