D CKE EAAI
E: Carefully study the roughing7in pages located in the inside back cover pocket, and the illustration at right before you begin construction of the stud pocket. Follow the framing details carefully.
Use x4 framing for the stud pocket. Make sure you allow for access to the pump in the event the BodySpa requires service. Determine the drain location.
We recommend a room size approximately 607inches long x 487inches wide x 847inches high for the Custom BodySpa installation. The basin design must
provide | for a | water depth of at least | 37inches above | ||||
the top of the suction cover. This | will | allow | an | overall | |||
basin depth of about 97inches. The threshold of the | |||||||
basin should be 6 to 77inches above the top | of | the | |||||
suction | cover. | Construct the basin framing to | result | ||||
in | an | overall | basin water capacity | between 90 | and | ||
00 | gallons. |
|
|
|
|
|
IALLAI
You must provide at least 3 cubic feet (length x width x height) of unrestricted air space around
the pump box for the motor to cool properly and to provide access to the pump. We suggest you construct a false wall behind the face wall framing.
Locate the false wall along | the | tower wall. |
|
| |||||
For new installations, build | this false wall so at |
| |||||||
least | 7inches of access space exists | to | the back | of | |||||
the face wall. For existing installations with |
|
| |||||||
finished walls, or if separate | access | panels for | the | ||||||
pump, | drain, | water | supplies, | and | suction | assembly |
| ||
are not feasible, provide more than 47inches of |
| ||||||||
access space between the false and face | walls | so | a | ||||||
repair | person | can | maneuver | between | the | walls. |
|
|
Carefully study the door enclosure installation instructions packed with the door enclosure. Construct suitable framing for the door enclosure, including a header and support framing above the doorway to prevent heat and moisture from escaping. Remember to locate the door enclosure perpendicular to the tower wall.
If you plan to install grab bars or other accessories, provide sufficient backing.
Check oint #1
-oom size and layout known.
-rovide 32 cu. ft. air space around pump box.
-Footbath basin size and shape known.
-Face and false wall locations known.
-Drain location known.
634777AA (A) | Kohler Co., Kohler, WI |