Kohler 116347-2 manual Esin UIE, Rain Loation, Waterproofin Material

￿ESI￿N ￿UI￿E

￿RAIN LO￿ATION

We recommend the K67179 ￿rain for this installation￿ The K67179 ￿rain has been specially designed for the ￿ustom ￿odySpa￿ and uses a large capacity strainer and drain tube to reduce drainage time￿ The drain tube section of the K67179 ￿rain is provided by the installer￿ and must be 161/26inch ￿I￿￿￿￿ rigid PV￿ tubing￿

The K67179 ￿rain overflow assembly is designed for a finished wall thickness between 3/4 and 163/46inches￿ and for a maximum finished basin thickness of 161/26inches at the drain￿

The drain should not be located more than 486inches from the drain tee￿

Refer to the roughing6in information included with the K67179 ￿rain for specific details￿

NOTE: The K67179 ￿rain is packed with its own installation instructions￿ Please refer to that document to install the drain￿

You can use a floor drain other than the K67179 if you wish￿ ￿ny floor drain used for this installation must drain water at a minimum rate

of 10 gallons per minute to minimize drainage time￿ and must use 161/26inch ￿I￿￿￿￿ drain tubing￿ ￿e sure to follow the drain manufacturer￿s instructions￿

WATERPROOFIN￿ MATERIAL

WARNIN￿: Risk of prop￿rty damag￿ and

conc￿al￿d l￿akag￿￿ To achieve a watertight ￿odySpa installation￿ it is critical that you install a waterproofing membrane or applied compound according to the material manufacturer￿s instructions￿ Kohler ￿o￿ will not be liable for damage caused by waterproofing materials that are improperly installed or sealed￿

The ￿ustom ￿odySpa produces water flow rates￿￿up to gallons p￿r minut￿To achieve a watertight installation￿ it is critical that you install a waterproofing membrane or applied compound to￿ntirthe ￿ floor and

wall surfaces ￿up to the ceiling￿￿ You must follow the material manufacturer￿s instructions to ensure a watertight installation￿

116347626AA ￿￿￿ 6 Kohler ￿o￿￿ Kohler￿ WI