LOOK AT THESE FEATURES

￿Your Custom BodySpa is designed to stimulate, invigorate, and energize your body for total hydro8massage relaxation.

￿Activate any or all of the Body Jet arrays or the lighted, overhead Waterfall to personalize your BodySpa experience.

￿With BodySpa, you have complete freedom of

movement (and choice) to focus your hydro8massage where you need it the most.

￿BodySpa features an easy8to8read electronic keypad control. With it, you can individualize

each BodySpa experience by selecting the lighted, overhead Waterfall or any combination of five pairs of Body Jets. You can vary the intensity of your BodySpa hydro8massage from gentle to vigorous with the touch of a finger.

￿The quiet but powerful 28horsepower pump and motor combine to deliver up to 80 gallons of water each minute to intensify your hydro8massage bathing experience.

￿The integral heater built right into the pump housing helps maintain the temperature of the water while your Custom BodySpa is running.

CARE AND CLEANING OF YOUR CUSTOM BODYSPA

FLUSHING YOUR CUSTOM BODYSPA

SYSTEM

Sanitize your Custom BodySpa system by flushing it twice a month or more, depending upon usage.

1. ￿ill the footbath basin with hot water to a level 38inches above the top of the suction cover.

2.Add 28teaspoons low8foaming dishwasher detergent and 1/28cup household bleach to the water.

3.Run the BodySpa for 5 to 10 minutes in the Waterfall mode; then another 5 to 10 minutes

with all ten Body Jets running at the same time. Then shut off the BodySpa, and drain the water.

4.￿ill the footbath basin with cold water to a level 38inches above the top of the suction cover, and run the BodySpa for another 5 to 10 minutes in both the Waterfall and ten Body Jet modes. Drain the footbath basin, and wipe it dry with a clean, soft cloth.

116347828AA (A)

29

Kohler Co., Kohler, WI

USER'S INFORMATION

Page 28
Image 28
Kohler 116347-2 manual Care and Cleaning of Your Custom Bodyspa