4-4. Removal of Units

(1)Removal of the Right-side Door

1.Remove the Front Door.

2.Remove the Controller Protective Cover.

3.Remove the Rear Cover.

4.Remove the Front Cover.

5.Remove the Right-side Rear Cover.

6.Remove the harness and connector.

7.Slightly open the Right-side Door and, supporting the door with your hand, remove one screw and

two C-rings.

4131D027AA

8.Pull out the shaft and remove the Right-side Door.

4131D027AA

(2)Removal of the Print Head Unit (PH)

1.Remove the Front Door.

2.Remove the Controller Protective Cover.

3.Remove the Rear Cover.

4.Remove the Front Cover.

5.Remove the Right-side Cover.

6.Remove the harness and connector.

7.Slightly open the Right-side Door and, supporting

the door with your hand, remove one screw and two C-rings.

4131D027AA

106