•This product contains a high-voltage unit and a circuit with a large current capacity that may cause an electric shock or burn.

•The product also contains parts that can jerk suddenly and cause injury.

•If this product uses a laser, laser beam leakage may cause eye damage or blindness.

WARNING

3.Do not throw toner or the toner bottle into a fire.

•Do not throw toner or the Toner Bottle (Imaging Cartridge, Toner Cartridge) into a fire. Toner expelled from the fire may cause burns.

4.Use the specified parts.

•For replacement parts, always use the genuine parts specified in the manufac- turer’s parts manual. Installing a wrong or unauthorized part could cause dielectric breakdown, overload, or undermine safety devices resulting in possi- ble electric shock or fire.

•Replace a blown electrical fuse or thermal fuse with its corresponding genuine part specified in the manufacturer’s parts manual. Installing a fuse of a different make or rating could lead to a possible fire. If a thermal fuse blows frequently, the temperature control system may have a problem and action must be taken to eliminate the cause of the problem.

5.Handle the power cord with care and never use a multiple outlet.

•Do not break, crush or otherwise damage the power cord. Placing a heavy object on the power cord, or pulling or bending it may damage it, resulting in a possible fire or electric shock.

•Do not use a multiple outlet to which any other appliance or machine is con- nected.

•Be sure the power outlet meets or exceeds the specified capacity.

6.Be careful with the high-voltage parts.

•A part marked with the symbol shown on the left carries a high voltage. Touch- ing it could result in an electric shock or burn. Be sure to unplug the power cord before servicing this part or the parts near it.

7.Do not work with wet hands.

•Do not unplug or plug in the power cord, or perform any kind of service or inspection with wet hands. Doing so could result in an electric shock.

8.Do not touch a high-temperature part.

•A part marked with the symbol shown on the left and other parts such as the exposure lamp and fusing roller can be very hot while the machine is ener- gized. Touching them may result in a burn.

•Wait until these parts have cooled down before replacing them or any sur- rounding parts.

12