(2)Replacement of the Image Transfer Belt Unit

1.Open the Front Door.

2.Remove the Waste Tonner Bottle.

3.Remove the Drum Cartridge.

4.Remove two screws and the Image Transfer Belt

Unit.

NOTE

When replacing the Image Transfer Belt Unit, be sure to remove the packing materials.

Do not touch the transfer belt with bare hands.

5.To reinstall the belt unit, reverse the order of removal.

6. Select functions as follows: Service -> Service/ Service Person -> Reset Counter/Fuser Unit. Then, clear the counter.

4131D061AA

(3)Replacement of the Toner Cartridge

1.Open the Front Door.

2.Remove the Waste Tonner Bottle.

3. Remove the Drum Cartridge.

NOTE

Discard the Toner Cartridge according to the applicable local regulation. Do not throw the Toner Cartridge into an open flame.

C4131o018AA

4. Remove the packing materials and install the Toner Cartridge.

5. Enter the capacity of the Toner Cartridge just installed through the control panel.

E.g.: If a Yellow Toner Cartridge has been replaced (4.5 K)

“Menu/Engine -> Replace Toner -> Yellow -> High”

C4131o021AA

94