Konica Minolta 2300 1.SAFETY PRECAUTIONS FOR INSPECTION AND SERVICE, 1-1.Warning, 1.Always observe precautions, 2.Before starting the procedures, be sure to unplug the power cord

1.SAFETY PRECAUTIONS FOR INSPECTION AND SERVICE

•When performing inspection and service procedures, observe the following precautions to prevent accidents and ensure utmost safety.

✽Depending on the model, some of the precautions listed below do not apply.

• Different markings are used to denote specific meanings as detailed below.

WARNING

•Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

CAUTION

•Indicates a potentially hazardous situation whech, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsave practices.

•The following graphic symbols are used to give instructions that need to be observed.

Used to call the service technician attention to what is graphically represented inside the marking (including a warning).

Used to prohibit the service technician from doing what is graphically represented inside the marking.

Used to instruct the service technician to do what is graphically represented inside the marking.

1-1. Warning

WARNING

1.Always observe precautions.

•Parts requiring special attention in this product include a label containing the mark shown on the left plus precautionary notes. Be sure to observe the pre- cautions.

•Be sure to observe the “Safety Information” given in the user documentation.

2.Before starting the procedures, be sure to unplug the power cord.

11