Konica Minolta C252 appendix Rom

Installing the Printer Driver

2

14 When installation is complete, make sure that the icon of the installed printer appears in the Printers window.

15 Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

Installing the Printer Driver Using Plug and Play

For Windows 98SE

1 After using a parallel cable or a USB cable to connect this machine to a computer, turn on the computer.

–Do not disconnect or connect the cable while the computer is start- ing up.

2 Insert the Windows printer driver CD-ROM into the computer’s CD- ROM drive.

–Konica Minolta PCL Driver: User Software CD-ROM

–Konica Minolta PostScript Driver: PostScript Printer Driver CD-

ROM

3 Turn the main power of this machine on.

The Add New Hardware Wizard starts up.

4

5

6

7

Click the [Next] button.

Select “Search for the best driver for your device (Recommended)”, and then click the [Next] button.

Select “Specify a location”, and then click the [Browse] button.

Specify the folder on the CD-ROM that contains the printer driver for the operating system that you are using, and then click the [OK] button.

–Konica Minolta PCL Driver: User Software CD-ROM “Driver\bizhubC252_C252P” folder

–PostScript PPD driver: PostScript Printer Driver CD-ROM “Driver\PS-PPD” folder

8 Click the [Next] button, and then follow the on-screen instructions. If using a parallel connection, proceed to step 10.

9 The Add New Hardware Wizard dialog box appears again. Repeat steps 4 through 8.

C252 2-11