Konica Minolta C252 appendix For Windows Me/2000

2

Installing the Printer Driver

10 When installation is complete, make sure that the icon of the installed printer appears in the Printers window.

11 Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

For Windows Me/2000

1 After using a parallel cable or a USB cable to connect this machine to a computer, turn on the computer.

–Do not disconnect or connect the cable while the computer is start- ing up.

2 Insert the Windows printer driver CD-ROM into the computer’s CD- ROM drive.

–Konica Minolta PCL Driver: User Software CD-ROM

–Konica Minolta PostScript Driver: PostScript Printer Driver CD-

ROM

3 Turn the main power of this machine on.

–For Windows Me

The Add New Hardware Wizard starts up.

–For Windows 2000

The Found New Hardware Wizard starts up.

4 Select “Search for a suitable driver for my device (recommended)” (for Windows Me, select “Automatic search for a better driver (Recom- mended)”), and then click the [Next] button.

5 For Windows 2000, select “Specify a location”, and then click the [Next] button.

For Windows Me, select “Specify a Location”, and then click the [Browse] button.

6 Specify the folder on the CD-ROM that contains the printer driver for the operating system that you are using, and then click the [OK] button. Printer drivers that can be selected:

–For Windows Me

Konica Minolta PCL driver: User Software CD-ROM “Driver\bizhubC252_C252P” folder

Postscript PPD: PostScript Printer Driver CD-ROM “Driver\PS-PPD” folder

2-12 C252