Konica Minolta C451 manual Reminder

4 In the “NDPS Printer Name” box, enter the printer name.

5 In the “Printer Agent Source” column, select “Create a New Printer Agent”, and then click the [Create] button.

6 Check the printer agent name, and then in the “NDPS Manager Name” box, browse through the NDPS manager names, and register one.

7 In “Gateway Types”, select “Novell Printer Gateway”, and then register it.

8 In the Configure Novell PDS for Printer Agent window, select “(None)” for the printer type and “Novell Port Handler” for the port handler type, and then register the settings.

3-36

Start up NWadmin.

Log on to NetWare as an administrator from a client computer.

1

2

3 Right-click the organization or organizational unit container where you will create the printer agent, and then click “NDPS Printer” on the “Cre- ate” sub-menu.

Note

Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been created and loaded.

Also, before performing the following procedure, check that the TCP/IP protocol has been set in the NetWare server, and check that the IP ad- dress has been set for this machine and that this machine is on.

Setting up network printing

3

11 Use the NetWare server console to load MONITOR.NLM.

12 Select the connection information and, in the active connection col- umn, check that the created PServer is connected.

2

Reminder

When turning the power off, then on again, wait at least 10 seconds be- fore turning the power on again; otherwise, this machine may not function properly.

For NetWare 5.x/6 Novell Distributed Print Service (NDPS)

2

C451