Konica Minolta C451 manual Driver Password Encryption Setting

Various settings

9

Driver Password Encryption Setting

For the encryption common key for the password that is added to a print job, you can specify whether to use the encryption key that was specified at the factory or change it to a user-defined encryption password. (Default setting: User Factory Default)

-User-Defined: Specifies the encryption password. Enter an encryption password of 20 characters.

-Use Factory Default: Uses the default encryption password (encryption key [common key] that is already determined and that is not disclosed) that was specified at the factory.

Note

To display the Administrator Settings screen, refer to “To display the Ad- ministrator Settings screen” on page 9-34.

Encryption can be performed with an encryption common key, however, the passwords that can be used are the user password, account pass- word, and the secured document password.

When specifying the encryption password with “User-Defined”, be sure to specify “Encryption Key” in the printer driver. If the encryption pass- word for this machine and the encryption key for the printer driver are dif- ferent, the passwords do not match and printing cannot be performed.

When using OpenAPI, the encryption common key can be acquired from this machine.

1 In the Administrator Settings screen, touch [Security Settings].

2 In the Security Settings screen, touch [Driver Password Encryption Setting].

3 Touch the button for the desired setting.

C451 9-45