Konica Minolta C451 manual 8 9 10, Installing the printer driver

Installing the printer driver

2

For Windows XP/Server 2003

1 After using a USB cable to connect this machine to a computer, turn the computer on.

2

3

–Do not disconnect or connect the cable while the computer is start- ing up.

Insert the printer driver CD-ROM into the computer’s CD-ROM drive.

Turn the main power of this machine on.

–If the Add New Hardware Wizard does not start up, turn the main power off, then on again.

–When turning the power off, then on again, wait at least 10 seconds before turning the power on again; otherwise, this machine may not function properly.

The Found New Hardware Wizard dialog box appears.

4 Select “Install from a list or specific location (Advanced)”, and then click the [Next] button.

–If the Windows connect to Windows Update dialog box appears, select “NO”.

5 From “Search for the best driver in these locations”, select “Include this location in the search”, and then click the [Browse] button.

6 Specify the desired folder on the CD-ROM that contains the printer driver, and then click the [OK] button.

–Select the specified folder according to the printer driver to be used, the operating system, and the language.

–Konica Minolta PCL Driver: Windows XP/Server 2003: PCL driver, PS driver, Fax driver

7 Click the [Next] button, and then follow the on-screen instructions.

–When the Digital Signature dialog box appears, click the [Continue] button.

8

9

10

Click the [Finish] button.

When installation is complete, make sure that the icon of the installed printer appears in the Printers and Faxes window.

Remove the CD-ROM from the CD-ROM drive.

This completes the printer driver installation.

C451 2-19