Konica Minolta C451 manual Selecting the paper tray

Setting up the PCL driver (Windows)

5

–Unit: Selects the measurement unit that specifies the size.

3	Click the [OK] button.
2

Note

For custom sizes that are used often, it comes in handy if you add them to the paper size list. Add a custom paper size from the Settings tab. For details, refer to “Specifying the Settings tab settings” on page 5-48.

If using banner paper, specify the size of the banner paper in Custom Size. For details, refer to “Printing on banner paper” on page 9-68.

Selecting the paper tray

You can specify the paper you want to use for printing by selecting the paper tray that contains the loaded paper.

1

2

Click the Basic tab.

From the “Paper Tray” drop-down list, select the desired paper tray.

2

Note

If “Auto” is specified as the paper tray, you can select the paper type. If the paper tray setting is changed to a setting other than “Auto”, the paper type is fixed to its preregistered setting. Specify a paper type by clicking the [Paper Settings for Each Tray] button. For details, refer to “Specifying the paper type for a paper tray” on page 5-10.

C451 5-9