Konica Minolta manual C451 10-4

Troubleshooting

10

Symptom	Probable cause	Action
The stapling position	The orientation setting is not cor-	Check the stapling position in the
is not as expected.	rect.	printer driver setup dialog box.
The hole punch func-	Hole punching cannot be speci-	Check each setting in the printer
tion cannot be speci-	fied if “Booklet”, “Transparency”,	driver.
fied.	“Thick2”, “Thick3”, or “Envelope”
	is selected.
	Optional finishers and punch kit	Install the required optional finish-
	are required.	er and enable it using the printer
		driver.
The pages are not	Printed pages may be fed out	Check the orientation setting.
punched.	without being punched if the pa-
	per is loaded into the paper
	source with an incorrect orienta-
	tion.
The hole punch posi-	The orientation setting is not cor-	Check the punch position in the
tion is not as expect-	rect.	printer driver setup dialog box.
ed.
The overlay is not	Available computer memory	Simplify the overlay to reduce the
printed properly.	space is not sufficient.	data size.
The image is not print-	Available computer memory	Simplify the image to reduce the
ed properly.	space is not sufficient.	data size.
Paper is not fed from	Paper will not be fed from the	Load the paper source with paper
the specified paper	specified paper source if that pa-	of the appropriate size and orien-
source.	per source is loaded with paper of	tation.
	a different size or orientation.

C451 10-4