Konica Minolta DiMAGE_A2 instruction manual Charging the Battery

Charging the Battery

Before the camera can be used, the lithium-ion battery must be charged. Before charging the bat- tery, read the safety warnings on page 4 of this manual. Only recharge the battery with the supplied battery charger. The battery should be recharged before each shooting session. See page 170 for battery care and storage.

Plug the power cord into the back of the charger unit (1). Plug the other end of the cord into a live household outlet. The includ- ed AC cord is designed for the current of the sales region. Only use the cord in the region it was purchased. For more on the AC cable, see page 167.

1

With the battery contacts toward the charger, align the channels on the bottom of the battery with the tabs on the charger unit. Slide the battery into the unit.

The indicator lamp (2) will glow to show the battery is charging. The lamp will go out when the battery is charged. Charging time is approximately 150 minutes.

2

Slide and lift the battery to remove it from the charger. Unplug the power cord

from the outlet.

22 Getting up and running